All New Control
Panel Design, Powerful Functions, Exhibiting Optimal Editing
Features.
Servo-Drive Robots - TEL Series
TEL-3000SNC3 Series / 3000-3500 Tons
|
| |
| Features of Controllers |
* Suitable for irregular take-out motions for
special products, such as hooked products.
|
* Allows for products stacking up to 99*99*99
points. Once stacking quantity has been reached, and out signal is transferred to conveyor belt. When performing
the first time stacking, any foreign product existing on the production line will be detected. If the foreign
product is not removed during stacking, stacking
motion will stop.
|
| * Provides insert in-mold function, and picks
product at a setting position. Once mold opens, the robot picks product and inserts it into a specified
position.
|
| * Allows for simultaneous editing of 3 axes
positions.
|
| * Module functions provide any motion editing as
desired. The control provides 16384 commands for program editing and memory function.
|
| * Speed increasing and reducing function. A
handwheel is provided for convenient program editing and simulation. |
| * In manual mode, operator may use a hand wheel
for micrometric position adjustment. This avoids operational error and provides protection for
the mold.
|
| * Advanced injection confirmation signal
eliminates the problem of robot bumping and clamping against the mold.
|
| * The robot arm can perform inside insert and
take-out function at any position inside or outside of mold.
|
* Remote controller with the LCD display for easy
reading. The screen capacity is 260 Chinese
characters.
|
| * Choice of English/Chinese displays on screen.the
control panel is a separated design, allowing for operation control at any position. Machine
interface functions include: mold clamp interlock, eject forward interlock, safety door control, product counting
and cycle time.
|
| |
Features of Structure
|
* All components on this robot are made by modular
manufacturing for superior
interchangeability.
|
| * Extra large construction assures high rigidity and
vibration-free. |
| * The second step of the vertical stroke is transmitted by
a steel reinforced belt. Simultaneous motions for the first
and second stroke give fast stroke speed.
|
* The transmission mechanisms are equipped with racks for
upgrading service life and
accuracy.
|
| * Driven by high performance server motor combined with
rigid rack for stable and vibration-free motions.
|
| * Two step vertical stroke with two linear motion guide
ways for effortless, stable and vibration-free movement.
|
| * A large, durable, flexible strip is provided to prevent
the electrical wires and air circuit pipes from being damaged.
|
| |
|
|
| MODEL |
TEL-2000(NC3) |
TEL-2500(NC3) |
TEL-3000(NC3) |
| Suited for injection molding machine |
1600-1800 Tons |
2000-2500 Tons |
3000-3500 Tons |
| Power source |
220V±10%, 50/60HZ |
| Electric consumption |
8A |
10A |
| Air pressure |
6kg/cm² |
| Drive system |
Freq. inverter motor
(servo motor) |
| Take-out stroke (Z) mm |
A: 2000 |
A: 2500 |
A: 3000 |
| Longitudinal stroke (Y) mm |
A: 700(1160) |
A: 800(1320) |
A: 900(1560) |
| Traverse stroke (X) mm |
3350 |
| Posture |
90° |
| Max. grip weight (Jip weight included) |
25 kg |
30 kg |
35 kg |
| Air consumption (AT 5kg/cm²
pressure) |
100 L/Min. |
| *
"NC" means the air consumption per minute on servo
model, which is the air consumption on vacuum
generator. |
| *
All specifications, dimensions and design
characteristics shown in this catalogue are subject
to change without notice. (Sprue arm is driven by
air cylinder) |
|
|
Last Updated ( Friday, 20 February 2009 )
|
