Advanced Software Design. A New Standard of
Practical Robots.
Traverse Type Robots
HC-T525P / 50-180 Tons
HC-T625P / 180-250 Tons
|
| |
* Self-Diagnostic Functions:If Trouble occurs,the operator is alerted by an alarm sounding,and the trouble is desplayed on the control panel.
|
* The arm features anti-drop in case of insufficient air pressure or power failure.
|
* Fast motion- The product extriact time is only 0.7 second.Entire cycle time is about 3
seconds.
|
* High positioning accuracy and high stability.The robot is precision constructed throughout.All Strodes have shock absorbers.Time setting accuracy is 0.1 second these assure accurate positioning and maximum stability at high speed operations.
|
* In the event of gripping failure,the operator only needs to open the safety door,take out the product and close the safety door.Then Machine motions will restart automatically with no resetting necessary.
|
* The arm can be quickly swiveled to 90° forward and backward.
|
* The lubrication - free air circuit eliminates problems caused by lack of lubrication and avoids oil contamination on the product.
|
* Centralized speed control for convenience.
|
* Adjustable arm position increases vertical stroke.
|
* The air operated gripper eliminates electrical short circuit problems.Sprue dimensions from 1 to 10mm can be positively sensed.
|
* The vertical guide rod is manufactured from SUJ2 bearing steel with hardness up to 60° hard chrome treated for low friction coefficient and lubrication free.
|
|
| |
| |
| MODEL |
HC-T525P |
HC-T625P |
| Suited for injection molding machine |
50-180 Tons |
180-250 Tons |
| Power source |
220V±10%,
50/60HZ |
| Electric consumption |
1A
ø2 |
| Air pressure |
5kg/cm² |
| Drive system |
Air cylinder |
| Take-out stroke (mm) |
550 |
650 |
| Longitudinal stroke (mm) |
100 |
| Posture |
70°~90° |
| Fastest cycle time |
3.0sec. |
3.2sec. |
| Fastest extract time |
0.7sec. |
0.8sec. |
| Max. grip weight (Jip weight included) |
1000g |
| Air consumption (AT kg/cm²
pressure) |
12.7 |
14.4 |
*
All specifications, dimensions and design
characteristics shown in this catalogue are subject
to change
without notice.
|
|
Last Updated ( Friday, 20 February 2009 )
|
